These adapters allow you to quickly insert a drill bit into any power driver that accepts the standard ANSI 1/4″ shank. A collet-type chuck holds the bit firmly. Quick interchangeability is the main feature of these devices. Used alone or in the QUICK CHUCK, drill changes and bit changes become a snap. No need to mess with loosening and tightening a drill chuck. A real timesaver. Bits are easily replaced. Bits NOT included. Length about 2 1/4″, weight about 1 oz.
| Cat No. | For Drill | For Drill | For Metric | Cat No. | For Drill | For Drill | For Metric | |
| DA-4 | 1/16″ | 52-54 | 1.4-1.6 | DA-11 | 11/64″ | 16-19 | 4.1-4.4 | |
| DA-5 | 5/64″ | 45-51 | 1.7-2.0 | DA-12 | 3/16″ | 11-15 | 4.5-4.8 | |
| DA-6 | 3/32″ | 40-44 | 2.1-2.4 | DA-13 | 13/64″ | 5-10 | 4.9-5.2 | |
| DA-7 | 7/64″ | 33-39 | 2.5-2.8 | DA-14 | 7/32″ | 2-4 | 5.3 – 5.6 | |
| DA-8 | 1/8″ | 30-32 | 2.9-3.2 | DA-15 | 15/64″ | 1-B | 5.7-6.0 | |
| DA-9 | 9/64″ | 27-29 | 3.3-3.6 | DA-16 | 1/4″ | C-E | 6.1-6.4 | |
| DA-10 | 5/32″ | 20-26 | 3.7-4.0 | |||||
| DA-20, Set of Seven, 1/16″ through 1/4″ by 1/32″ increments (with drill bits.) Wt 8 oz | ||||||||
